A tanning bed, also referred to as a sunbed, is a contraption lined with sunlamps where one either stands or reclines in order to get a suntan. It is a device that emits ultraviolet radiation used for cosmetic reason specifically to induce artificial tanning of the skin.

Nowadays, getting a “fake bake” is just as easy as 1-2-3 with the many tanning salons available, as well as the rise in the popularity of home tanning devices. Any equipment requires regular check-up and maintenance to ensure that it is at its peak of performance. This also goes with the tanning beds. There are two ways to ensure that the tanning machines are at their topnotch conditions, and these are proper cleaning and preventive maintenance.

Fact. Industry experts believe that the tanning efficiency of a dirty and poorly maintained tanning unit drops 20% to 30% after six months of neglect. And it is because of this that every tanning equipment owner must know the tips and tricks to keeping the tanning bed at its tip-top shape.

Tanning bed cleaning is very vital to the tanning process. It enhances the performance of the tanning bed. Do this by keeping the fans and air vents of the equipment clean. Gently remove foreign particles like dusts from the tanning bed surface as well as its other components. Inspect all cooling units and air vents at least twice a year to keep your tanning bed running at its optimal performance.

Do not use air compressors or any high pressure equipment in the cleaning process as this may damage the tanning bed’s wiring and electrical parts. The removal and cleaning of the acrylics. Fogged up and scratched acrylic reduces your tanning bed’s UV output. It was found out that polishing even the much older acrylics results to an impressive improvement in tanning performance.
There is an assortment of tanning bed cleaners and sanitizers in the market. However, most tanning equipment come with it’s recommended tanning bed cleaner or sanitizer. Before applying the product on your equipment, be sure to read and understand the instructions carefully. You would not want to ruin your machine just because of a simple misread direction. Also check out the ingredients of the tanning bed cleaner or sanitizer. Be sure that you are not allergic to any of the components in these products. Never use Windex or any similar cleaners on your tanning beds. These cleaning products will cause damage on your equipment.

After all they cost much more anyway. But for those who wants to save more and keep their tanning budget, here is a budget saving tip. White vinegar may be used as an effective cleaning agent and it is safe on your skin, too. Mix one part water and one part white vinegar in a spray bottle. Another tip is to use your ordinary rubbing alcohol. Since most of the sanitizing products used by tanning salons are alcohol-based, rubbing alcohol may also do just fine for your tanning bed cleaning needs.

These are only some simple but helpful tips but if you just keep them in mind, these will surely ensure you a safe and healthy sunless tanning experience. Just always remember that the key to a successful tan is a tanning bed that is running in tip-top ace condition.

Like this article? Please add your comments and let us know what you think!

Copyright Nora P. Dyson, tanningbedsecrets.com